$185 BK Precision 1710A Single Output DC Power Supply, Analog, 0-30 Industrial Scientific Lab Scientific Products Lab Instruments Equipment 1710A,DC,Power,$185,Supply,,barongan-kudus.desa.id,Analog,,Precision,Output,/generable1509005.html,BK,Industrial Scientific , Lab Scientific Products , Lab Instruments Equipment,Single,0-30 1710A,DC,Power,$185,Supply,,barongan-kudus.desa.id,Analog,,Precision,Output,/generable1509005.html,BK,Industrial Scientific , Lab Scientific Products , Lab Instruments Equipment,Single,0-30 BK Precision 1710A Single New popularity Output DC 0-30 Analog Power Supply $185 BK Precision 1710A Single Output DC Power Supply, Analog, 0-30 Industrial Scientific Lab Scientific Products Lab Instruments Equipment BK Precision 1710A Single New popularity Output DC 0-30 Analog Power Supply

BK Precision 1710A Single New Max 76% OFF popularity Output DC 0-30 Analog Power Supply

BK Precision 1710A Single Output DC Power Supply, Analog, 0-30

$185

BK Precision 1710A Single Output DC Power Supply, Analog, 0-30

|||

Product description

Style:Bamp;K Precision 1710A

This Bamp;K Precision single-output linear DC power supply unit provides a constant source of DC voltage for powering and testing electronic devices in research and development, production, and laboratory applications. The power supply unit (PSU) has one output that provides adjustable DC voltage and current. The operator can choose between high and low current settings to help improve stability and measurement accuracy. Two analog displays show voltage and current readings simultaneously. The output current can be adjusted using the fine and coarse control knobs on the PSU's front panel. Two PSUs can be connected in series to supply more voltage, or they can be connected in parallel to supply more current. A cooling fan helps prevent overheating, and built-in overload and reverse-polarity protection helps prevent damage to the PSU and the device under test. This Bamp;K Precision power supply unit is offered with a choice of rating voltage and current, and weight.

Specifications
Number of outputs 1
Load regulation Less than or equal to 0.01% of voltage reading + 3mV (millivolts); less than or equal to 0.2% of current reading + 3mA (milliamp)
Line regulation Less than 0.01% of voltage reading + 3mV; less than or equal to 0.2% of current reading + 3mA
Ripple and noise Less than or equal to 1mV RMS (root mean square)
Ripple current Less than or equal to 3mA RMS
Recovery time Less than or equal to 100 μs (microseconds)
Meter accuracy + or – 2.5%
Power requirements 120VAC at 60Hz
Operating temperature and humidity 32 to 104 degrees F/0 to 40 degrees C, less than or equal to 75% relative humidity
Dimensions 158 x 140 x 318mm/6.2 x 5.5 x 12.5 inches (H x W x D)

H is the vertical distance from lowest to highest point, W is the horizontal distance from left to right, and D is the horizontal distance from front to back.

Power supply units (also known as PSUs, AC power supplies, DC power supplies, and battery eliminators) provide AC or DC voltage to power or test devices such as tools, appliances, and electronic components. The PSU draws energy from a line source such as a wall socket and converts it to a constant, specified amount of voltage or current that is then outputted to a connected device. In general, a power supply unit will be classified as either a linear PSU (also known as a linear regulation or line-frequency PSU) or a switched PSU (also known as a switching-mode power supply, SMPS, or switcher). Typically, a linear PSU has a simpler design and provides a faster transient response time and less electrical interference and noise than a switched PSU. A switched PSU is often smaller, lighter, and more efficient than a linear PSU and generates less heat. The transient response time of a PSU indicates how quickly the PSU can resume the desired constant output after a sudden change in input. Ripple voltage or current indicates how much unfiltered noise and AC voltage or current is present at the output of a filtered power supply operated at full load. The temperature coefficient is the percent average change in output voltage per degree centigrade of change in ambient temperature. Fuses, current limiters, and other forms of overload protection can be built into the PSU to help protect against voltage spikes or short-circuiting.

Bamp;K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.

BK Precision 1710A Single Output DC Power Supply, Analog, 0-30

Can't find what you are looking for?
Contact Us

Freshen up your gym wear wardrobe with some of our newest, and freshest items.

 
 
 
 
To Top